you are here: home > products > ant16 specification
This is the specification of the Ant16 logic analyzer module. Additional technical information is presented in the FAQ section.
Acquisition Logic |
|
Asynchronous Sample Rate 500MHz maximum, 100Hz minimum. 5-2.5-1 sequence. |
|
Synchronous Sample Rate 100MHz maximum. |
|
Channels 16, numbered 0 to 15 |
|
Memory Depth 2048 samples per channel |
|
Threshold 0.8V to 2.5V, in steps of 0.1V |
|
Minimum Input 0.5V below threshold for Lo, 0.5V above threshold for Hi |
|
Trigger Connections Trigger In and Trigger Out. Trigger In is only available in asynchronous clocking mode (using the internal clock). In synchronous clocking mode, this connection becomes Clock In. |
|
Input Skew less than 2ns, channel to channel |
|
Input Impedance 100Kohms in parallel with 10pF |
|
Maximum Input Voltages +40V down to -40V |
Triggering |
|
Conditions 0, 1, Rising Edge, Falling Edge, Either Edge, and DON'T CARE for all channels. |
|
Pattern Recognisers 2 |
|
Edges Trigger on the condition becoming TRUE or on the condition becoming FALSE |
|
Pass Count 0 to 1023 |
|
Trigger Logic Multi-state trigger logic with Edge, Pattern, and Complex triggering. Complex triggering includes occurrence counting and minimum and maximum duration measurement. |
|
Trigger Position 10% to 90% of acquisition memory, in 10% steps |
Environmental |
|
Operating Temperature 5°C to 40°C |
|
Storage Temperature -40°C to 75°C |
|
Size 65 mm x 35mm x 15mm (2.5" x 1.4" x 0.6") |
|
Power Consumption 2.2W maximum |
|
Power Source Via USB cable. No external power supply. |
|
Computer Connection USB connection to computer. Includes an attached USB cable. |
Software Features |
|
Host Computer Logic Analyzer front panel software included for Windows 98/ME/2000/XP |
|
Print Waveforms Yes |
|
Data Output Text File and CSV File |
|
Cursors 1 main cursor plus 1 auxiliary cursor |